Consumables

As in the past, glass drilling machines with manual feed are part of the basic equipment of every glazier's workshop. These machines are indispensable, particularly for the universal processing of small and medium sized glass panes in small quantities. Because the requirements are diverse, in this section Bohle offers double-sided as well as basic one-sided tabletop drilling machines. These machines are very sturdy and easy to adjust.

As in the past, glass drilling machines with manual feed are part of the basic equipment of every glazier's workshop. These machines are indispensable, particularly for the universal processing of... read more »
Close window
Consumables

As in the past, glass drilling machines with manual feed are part of the basic equipment of every glazier's workshop. These machines are indispensable, particularly for the universal processing of small and medium sized glass panes in small quantities. Because the requirements are diverse, in this section Bohle offers double-sided as well as basic one-sided tabletop drilling machines. These machines are very sturdy and easy to adjust.

Filter
12 Product(s)
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
Diamond Core Drills, Standard Quality Diamond Core Drills, Standard Quality
BO 5000403
For float glass fabrication use · drill base made of steel · covered with protective lacquer · diamond coating from sintered material · drill hasto be sharpened before first use - in 75mm and 95mm lengths (Forvet machines) available...
Add to wish list
Sharpening Stone for Diamond Drills Sharpening Stone for Diamond Drills
BO 5000499B
By drilling powerfully into the sharpening stone a few times, new spaces are created between the diamond particles, leading to renewed cutting ability · if sharpening does not lead to a positive result, first use the dressing stone ·...
Add to wish list
Diamantor® Thread Converter Diamantor® Thread Converter
TG AF10
This adaptor makes flushing head drills universally suitable for any cordless drilling machine, simply spray some water into the drill hole for cooling. Inner thread M10 Chuck 3/8" (10 mm)
Add to wish list
Diamantor® Diamond Core Drills Diamantor® Diamond Core Drills
TG F05
Galvanized for ceramic tiles with eccentric inner drill hole simple core ejection Ideal for shower hardware installations
Add to wish list
Diamond Countersinks Diamond Countersinks
BO 5000535
Outer thread (Continental) R 1/2"
Add to wish list
Grinding Cone Holder Grinding Cone Holder
BO 79.610
Elastic rubber body · transverse slits for attaching and exchanging the grinding cones BO 79.6120 (ø60 mm) / BO 79.9120 (ø90 mm) · Made in Germany Shaft 1/4" (ø 6 mm)
Add to wish list
Grinding Cone Grinding Cone
BO 79.6120
Made of diamond-coated, thin-walled metal · grit meets the requirements for arrissing drill holes · Made in Germany Working range min. ø1/8" (min. ø 3 mm)
Add to wish list
Diamond Hollow Drills for Ceramic Diamond Hollow Drills for Ceramic
BO 79.3605
Developed especially for the Bohle Aqua Drill wet drilling machine · manual drill bit exchange without tools · for drilling hard ceramic tiles, granite, marble and regular tiles Belgian thread 1/2"
Add to wish list
Set of Diamond Hollow Drills for Ceramic Set of Diamond Hollow Drills for Ceramic
BO 79.361
With one ceramic diamond hollow drill each with diameters of 6, 8, 10 and 12 mm · drill core ejector and pin for releasing tight drills
Add to wish list
Sharpening Stone for Diamond Drills Sharpening Stone for Diamond Drills
BO 5000499
By drilling powerfully into the sharpening stone a few times, new spaces are created between the diamond particles, leading to renewed cutting ability · if sharpening does not lead to a positive result, first use the dressing stone...
Add to wish list
Dressing Stone for Diamond Drills Dressing Stone for Diamond Drills
BO 5000498
Removes used particles and creates a new cutting edge · after using the dressing stone, sharpen the drill with sharpening stone BO 5000499 · when drills are operated with little forward feed, no self-sharpening process takes place and...
Add to wish list
Precision Drill Extension Precision Drill Extension
BO 5000504
For R 1/2" diamond hollow drills - ranging from 75 mm to 95 mm · industrial quality, stainless steel
Add to wish list
Recently viewed
Bohle uses cookies to offer you the best possible service. By continuing to use this site, you agree to the use of cookies.
I agree.