Glass Hardware and Door closer

Close window
Glass Hardware and Door closer

24 Product(s)
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
No results were found for the filter!
Center lock housing Center lock housing
BO 5214667
Lock including strike plate Hook bolt type Double 17 mm euro keyed cylinder included Suitable for bi-parting doors Stainless steel #304 cover caps Glass fabrication (lock): Depth: 2-9/16" (65 mm) · Height: 4-15/16" (125 mm) ·...
Center lock housing Center lock housing
BO 5214666
Lock including strike plate Hook bolt type Double 17 mm euro keyed cylinder included Stainless steel #304 cover caps and strike plate Glass fabrication (lock): Depth: 2-9/16" (65 mm) · Height: 4-15/16" (125 mm) · Radius corners:...
Set Self-closing Patch Fitting Alva Standard Duty EN3 Set Self-closing Patch Fitting Alva Standard Duty EN3
BO 5216620
The Alva self-closing patch fitting from Bohle enables a quick installation without troublesome floor excavations which cause a lot of dirt. As the entire technology is concealed inside the slimline fitting, opening the screed for...
Top Pivot PT 24 Top Pivot PT 24
BO 5216615
Pin diameter 9/16" (15 mm) Please note the new Alva EN3 Self Closing Patch has new glass fabrication requirements compared to the previous generation of self-closing Bohle hydraulic patch hardware. For a complete door set, purchase...
Patch fitting Alva guide rail PT20 PLUS Patch fitting Alva guide rail PT20 PLUS
BO 5216610
Suitably dimensioned cover cap for self-closing patch fitting Alva Standard Duty with plastic bushing for 9/16" (15 mm) diameter pin Glass thickness tempered glass 5/16" - 1/2" (8 - 12.7 mm) Please note the new Alva EN3 Self Closing...
Self-closing Patch Fitting Alva Standard Duty EN3 Self-closing Patch Fitting Alva Standard Duty EN3
BO 5216600
The Alva self-closing patch fitting from Bohle enables a quick installation without troublesome floor excavations which cause a lot of dirt. As the entire technology is concealed inside the slimline fitting, opening the screed for...
Self-closing Patch Fitting Set Heavy Duty EN5 Self-closing Patch Fitting Set Heavy Duty EN5
BO 5216580
Our Bohle Patch Fitting is surface mounted and therefore does not require a floor recess. Bohle's patch technology is in accordance with DIN EN 1154. tested as per DIN 1154 with 500,000 cycles For averagely frequented buildings...
Keep/Receiver/Strike GK50 Keep/Receiver/Strike GK50
BO 5214282
Glass thickness tempered glass 3/8", 1/2" (10, 12 mm) When used as a centre lock on double doors, one door must be used as a slave door.
Keep/Receiver/Strike Keep/Receiver/Strike
BO 5214284
When used as a centre lock on double doors, one door must be used as a slave door. Glass thickness tempered glass 3/8", 1/2" (10, 12 mm) Size 2-1/16" x 1-9/16" (53 x 40 mm)
Floor Spring EN3 Floor Spring EN3
BO 5214010
Adjustable closing speed 90° - 15° / 15° - 0° ambient temperature -20° - +45°C Dimensions 12 x 4-1/4 x 1-5/8" (305 x 108 x 40.5 mm) Suitable for glass, wooden and aluminium doors
Middle lock with flat bolt US20 Middle lock with flat bolt US20
BO 5214281
Euro profile cylinder (individual key) 2-3/8" (60 mm [30/30]) incl. 4 keys When used as a centre lock on double doors, one door must be used as a slave door. Glass thickness tempered glass 3/8", 1/2" (10, 12 mm)
Corner Clamp with stopper PT61 Corner Clamp with stopper PT61
BO 5214274
Glass thickness tempered glass 3/8", 1/2" (10, 12 mm)
1 From 2
Recently viewed