Bohle Patch Corner Fitting System

Close window
Bohle Patch Corner Fitting System

18 Product(s)
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
No results were found for the filter!
Architectural ladder pulls Architectural ladder pulls
Custom pull handles available upon request *Please check optional center post fabricationfor lengths of 60" and greater
Bohle Hydraulic Patch Fitting - Heavy Duty (Hold Open) Bohle Hydraulic Patch Fitting - Heavy Duty (Hold Open)
Our Bohle Patch Fitting is surface mounted and therefore does not require a floor recess. Bohle's patch technology is in accordance with DIN EN 1154. tested as per DIN 1154 with 500,000 cycles Variable closing speeds Can be used...
Bohle Hydraulic Patch Fitting - Heavy Duty (Non-Hold Open) Bohle Hydraulic Patch Fitting - Heavy Duty (Non-Hold Open)
Our Bohle Patch Fitting is surface mounted and therefore does not require a floor recess. Bohle's patch technology is in accordance with DIN EN 1154. tested as per DIN 1154 with 500,000 cycles Variable closing speeds Can be used...
Bohle Hydraulic Patch Fitting - Standard Duty EN3 Bohle Hydraulic Patch Fitting - Standard Duty EN3
Our Bohle Patch Fitting is surface mounted and therefore does not require a floor recess. Bohle's patch technology is in accordance with DIN EN 1154. tested as per DIN 1154 with 500,000 cycles Variable closing speeds Can be used...
Bohle Patch PT 20 Bohle Patch PT 20
Can be used for DIN left and DIN right With plastic bushing for 9/16" (15 mm) diameter pin Note: order top pivot bearing for ceiling mount, BO 5214319
Bohle Patch PT 30.3 Bohle Patch PT 30.3
For wall attachment as counter-bearing for the above corner unit PT20 BO 5214264 Screw-on plate for wall mounting
Bohle Patch PT 40 Bohle Patch PT 40
Gegenlager zu Eckbeschlag PT20 BO 5214264
Bohle Patch US 10 Bohle Patch US 10
Can be used for DIN left and DIN right Euro profile cylinder 60mm (30/30) incl. 3 keys
Floor Pivot Bohle Patch PT 11 with Mounting Plate Floor Pivot Bohle Patch PT 11 with Mounting Plate
Important: Please use a floor spring for closing the door automatically.
Floor Spring Floor Spring
ambient temperature -20° - +45°C Dimensions 12 x 4-1/4 x 1-5/8" (305 x 108 x 40.5 mm)
Hook Lock Bohle Patch with Keep and hook bolt Hook Lock Bohle Patch with Keep and hook bolt
When used as a centre lock on double doors, one door must be used as a slave door. Can be used for DIN left and DIN right No glass cutouts or drill holes required, clamp-on function suitable for sliding and double doors incl. 3 keys
Middle Lock Bottom/Middle Bohle Patch US 20 and Keep Middle Lock Bottom/Middle Bohle Patch US 20 and Keep
When used as a centre lock on double doors, one door must be used as a slave door. Can be used for DIN left and DIN right Euro profile cylinder 60mm (30/30) incl. 3 keys Keep needs to be ordered separately
1 From 2
Recently viewed