No results were found for the filter!
Bonding Plate for Glass Door 60 x 28 mm
BO 5206051
with matt nickel-plated special finish for safely bonding glass doors Door size max. 23-5/5 x 94-1/2" (600 x 2400 mm) Glass thickness 1/8 - 5/16 in (3 - 8 mm) Packaging unit 1 pc
Hinge arm for Damper
BO 5206064
Hinge arm with spring for damping device Door size max. 23-5/5 x 94-1/2" (600 x 2400 mm) Packaging unit 1 pc
Glass Door Hinge Tiomos Mirro 125° linear mounting plate
BO 5500290
Quick mounting without drill holes in the glass Three-dimensional adjustment via mounting plate integrated adjustable damper Distance door to body up to 3/4" (19 mm) Door does not extend into frame when opening; max. door height up...
Cristallo Fix Hinge Including bonding plates with damping...
BO 5206060
for inset and overlay doors Adjustment dimensions: Height ± 1/8" (2 mm); depth ± 1/8" (2 mm); width ± 1/8" (2 mm) Door size max. 23-5/5 x 94-1/2" (600 x 2400 mm) Glass thickness 1/8 - 5/16 in (3 - 8 mm) Packaging unit 1 pc
Glass patch fitting polished chrome with floor and...
BO 5200052
Can be used on the right or left side max. door width 196-7/8" (500 mm) Mounting plate 1/8" (3 mm) Height deduction dimension 3/8" (9 mm) Distance door/shelves min 13/16" (20 mm) Packaging unit 1 Pair Glass thickness 1/4" - 5/16"...
Glass Door Hinge mm DIN right for inset doors
BO 5206265
Version DIN right Glass thickness 1/4 - 1/2 in (4 - 8 mm) Packaging unit 1 Pair
Glass Door Hinge Swing round large ø 1-3/16" (30 mm) 1 x...
BO 5206261
High-quality stainless steel fitting suitable for inset doors, one 1/8" (3 mm) threaded pin in the hinge allows for door removal after bonding.
Cross mounting plate for Cristallo Fix 1. Version
BO 5206063
for 1-1/4" (32 mm) drill dimension Packaging unit 1 pc
Glass Door Hinge Swing round small ø 13/16" (20 mm) H...
BO 5206262
High-quality stainless steel fitting suitable for inset doors, one 1/8" (2.5 mm) threaded pin in the hinge allows for door removal after bonding.
Glass Door Hinge Swing round large ø 1-3/16" (30 mm) 1 x...
BO 5206263
High-quality stainless steel fitting suitable for inset doors, one 1/8" (3 mm) threaded pin in the hinge allows for door removal after bonding.
Recently viewed