No results were found for the filter!
BO 631.1
Positioning aid with two suction pads (Ø 120 mm) and special sealing lip · suction pads adjustable +/- 12 mm · sturdy plastic arms are 194 mm long and are connected to each other by a joint
BO 637.2
particularly suitable for small parts. Eccentrically arranged, flat plastic disc. The suction stop has an adjustment range of up to 6 mm. Suitable for all type of pl
BO 636.0
two rotatable, forked endpieces with connecting profile and plastic pressure screws for locking into place.
BO 636.1
as 636.0, but more robust version for thicker glass sheets and heavier weights. Particularly suitable for the construction of special aquariums
BO 630.2
Holding and positioning device made of 2 suction discs (ø 120 mm) with special sealing lip · can be fine adjusted to each other · with aluminum guides
BO 630.3
Holding and positioning device made of 2 (depending on the type up to 5) suction pads with special sealing lip, adjustable +/- 12 mm · can be fine adjusted to each other · with aluminum guides Holding and positioning device made of 2...
BO 633.10L
For the fixation of small glass parts optimised sturdy version! with 2 suction pads ø 2-3/16 in (55 mm) Adjustment range height / depth +/- 1/8 in (3 mm) 3-3/4 × 3 × 3-3/4 in (length × height × width)
BO 638.0
Verifix® pump-activated angle suction holder set in carrying case · as these positioning aids are mostly used in pairs, they are supplied as a set in a robust case ensuring that your valuable tools are well protected · the angle suction...
BO 639.1
The Verifix® Pro angle suction holder is a high quality product topping the list of positioning and fixing devices for glass bonding. Especially in the case of UV bonds, as is common in glass furniture or showcase construction, Verifix®...
SP BT6385
For use with the low viscosity UV adhesives B665-0, LV740, LV740VIS. When positioning the glass pane, a specific gap thickness can be adjusted with the aid of the thickness gauge. This guarantees that the minimum layer thickness of...
SP BT6386
For use with the medium viscosity UV adhesives B 690-0, B 678-0, B 682-T, MV760, MV760VIS. When positioning the glass pane, a specific gap thickness can be adjusted with the aid of the thickness gauge. This guarantees that the minimum...
BO 637.1
Eccentrically arranged, flat plastic disc. ø 70 mm, with integrated suction pad ø 55 mm · the suction stop has an adjustment range of up to 6 mm · suitable for all type of plate material · particularly when mounting
Recently viewed