Article successfully added.

VetroMount® base shoe F for top mount

Please note:

Test report, country-specific certificates and further information available in the “Downloads” section.

Technical Data

Mounting top mounting
Material Aluminum
Finish E6/C0
Line VetroMount®
Product type Floor mount profile
Base shoe load 1,0 kN

Additional Information:

The VetroMount® Floor profile for top installation is made of extruded aluminum and a... more

The VetroMount® Floor profile for top installation is made of extruded aluminum and a high-quality appearance. It is perfectly suited to create a flush finish on the concrete edge. For safely fixing the extrusion a screw distance of only 15-3/4" (400 mm) is required. Thanks to the use of concrete bolts, extension bolts are no longer required. The extended fixing plate can either be covered with cladding or fixed to the floor structure.
Suitable accessories, such as end caps, cover profiles, rubber spacers, etc. are available.
Newly developed by Bohle engineers, the VetroMount® balustrade system can be mounted in a few simple steps, saving time and costs. This is made possible by the revolutionary glass bearings and the fact that a simple concrete screw every 400 mm is enough for safely attaching the profile in top mount installations.
Important for planning and implementation: For the The General Building Inspection Test Certificate (AbP) and important information on statics and drainage, please refer to the “Downloads” section. When planning a glass railing system, drainage options must already be considered in the planning phase. In case of outdoor installations, also wind loads must be taken into account. Our statics overview, which you will also find in the “Downloads” section, serves as a basis for planning.

  • Glass thickness laminated glass 1/2" - 7/8" (12.76 - 21.52 mm)
  • max. glass height 51-3/16" (1300 mm)
  • min. glass width 11-13/16" (300 mm)
  • Base shoe load 1.0 kN
  • 4" (103 mm) glass insert depth for 1/2" (12 mm) glass thickness, or 4-1/8" (105 mm) for 5/8" - 11/16" (15-21 mm) glass in the profile
  • Tested system – Please take into account the country-specific equivalent certification.
  • System statics available
  • Installation with and without Cover Profile
  • Suitable for interior and exterior applications
  • For interior applications, we recommend the following screws: Hilti concrete screw HUS3-H 10 x 100 (BO 5211160) or Fischer concrete screw ULTRACUT FBS II 10 x 85
  • For exterior applications, we recommend the following screws: Hilti concrete screw HUS-HR 10 x 105 (BO 5211161) or Fischer concrete screw ULTRACUT FBS II A4 US 10 x 85

Additional product information is loading.

Unsere Produkthighlights und Zubehör zum Artikel.

Product highlights

  • Three intuitive steps towards the perfect balustrade system: insert, adjust, fix.
  • Simple, time- and cost-effective installation
  • Easy integration of a LED illumination in the glass storages
Unser Zubehör zum Artikel.

Accessories

  • Mounting kit
  • Side cover profile
  • Top cover profile
  • Cover profile for floor profile F
  • End Caps
  • Concrete screws
  • Rubber spacer for glass panels
  • Mounting aid
  • connecting pins
Alternative products
VetroMount® base shoe F for top mount VetroMount® base shoe F for top mount
BO 5403031

BO 5403031 (Length: 196-7/8 in (5000 mm))

VetroMount® base shoe F for top mount VetroMount® base shoe F for top mount
BO 5403030

BO 5403030 (Length: 98-7/16 in (2500 mm))

Recently viewed