Products from Bohle_Verifix

53 Product(s)
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2 From 5
No results were found for the filter!
UV Adhesive Verifix® MV 760 UV Adhesive Verifix® MV 760
Verifix® MV 760 was specially designed for very hard glass-metal bonds in furniture construction and shopfitting. It is moisture resistant and in combination with Pyrosil very well suited for bonding hot or cold food displays or bonds...
UV Adhesive Verifix® LV 740VIS UV Adhesive Verifix® LV 740VIS
Verifix® LV740 VIS enables quick, transparent and non-yellowing glass-glass edge bonding. The adhesive becomes very hard and is moisture resistant. As a light curing adhesive, it can be used for bonding UVA non-permeable glass types....
UV Adhesive Verifix® LV 740 UV Adhesive Verifix® LV 740
Verifix® LV740 enables quick, transparent and non-yellowing glass-glass edge bonding. The adhesive becomes very hard and is moisture resistant. Together with Pyrosil®, it is therefore very well suited for bonds inside bathrooms or for...
UV Adhesive Verifix® B 665-0 UV Adhesive Verifix® B 665-0
Create transparent glass-glass edge bonds in no time with Verfix® B 665-0 through capillary action. The adhesive is very hard once cured, making it suitable for static loads. In addition, because of the capillary action there is more...
UV Adhesive Verifix® B 682-T UV Adhesive Verifix® B 682-T
Verifix® B 682-T was specially designed for very hard glass-metal bonds in furniture construction. Hinges, shelf supports, locks, etc. can quickly be bonded to float glass or metal. Due to its impact resistance, the adhesive compensates...
UV Adhesive Verifix® B 678-0 Lamifix UV Adhesive Verifix® B 678-0 Lamifix
The B 678-0 adhesive is ideal for bonding large surface areas,from 4 x 4"(100 x 100 mm.) Thanks to its elasticity, it compensates tensions and outweighs the expanding behaviours of different materials. B 678-0 is light-curing and is...
UV Adhesive Verifix® B 690-0 UV Adhesive Verifix® B 690-0
The B 690-0 adhesive is ideal for bonding large surfaces from 4 x 4"(100 x 100 mm.) Thanks to its elasticity, it compensates tensions and outweighs the expanding behaviours of different materials. Always carry out test bonds in case of...
2 K Silicone Verifix® 2 K Silicone Verifix®
Bohle has developed the Verifix® two-component silicone adhesive especially for bonding glass surfaces. The product is ideal for use on mouth-blown and flashed glass, rolled stained glass or fusing glass, and of course for perfectly...
Coupling Agent Set for Verifix 2 K Silicone Coupling Agent Set for Verifix 2 K Silicone
The set includes a 90 ml bottle of primer and a 10 ml bottle of catalyser. Mix the contents of both bottles before use. For this purpose pour the contents of the small “catalyser“ bottle into the large “primer“ bottle and then shake it...
UV Adhesive Verifix® B 678-0 Lamifix with Spacers UV Adhesive Verifix® B 678-0 Lamifix with Spacers
B 678-0 stands out due to its high elasticity and compensates tensions during surface bonding. The spacers in the adhesive guarantee the optimum layer thickness. If the layer is too thin, the adhesive strength is reduced. Even very heavy...
UV Adhesive Verifix® B 690-0 with Spacers UV Adhesive Verifix® B 690-0 with Spacers
B 690-0 stands out due to its high elasticity and compensates tensions during surface bonding. The spacers in the adhesive guarantee the optimum layer thickness. If the layer is too thin, the adhesive strength is reduced. Even very heavy...
UV Adhesive Verifix® B 682-T with Spacers UV Adhesive Verifix® B 682-T with Spacers
The 682-T adhesive excels due to its high strength and compensates dynamic shocks and impacts. The spacers in the adhesive guarantee the optimum layer thickness. If the layer is too thin, the adhesive strength is reduced. Even very heavy...
2 From 5
Recently viewed