Manual Glass Cutting

Cutting wheels made of hardened steel were the first items Josef Bohle started to produce in 1923. The best-known and most widely produced glass cutters around the world are equipped with them. Glass cutters with steel wheels provide an especially economical way of cutting glass.

High quality - made in Germany.

This unique oil glass cutter is the basis of the SILBERSCHNITT 2000 System. It can be configured individually and is therefore ideal for complicated applications - whether for thick or thin glass, shaped or straight cuts. By simply exchanging the cutting heads with different angles, you are set anytime for any requirement.

High quality - made in Germany.

These are Genuine Toyo products - well known and widely used across North America for decades - Bohle respects your freedom of choice, but also only offers the you the genuine brands you can trust  ( no copy products here ) - Made in Japan

Completely opening and breaking the cut is best done with cut running pliers which are normally used from the end of the cut. Depending on the glass thickness and the complexity of the cut, Bohle offers different tools which guarantee excellent cutting results and breaking edges. These Bohle tools are also suitable for shaped cuts!  High quality tools of precision Made in Germany.

If it doesn't say Bohle on it, it isn't ours - don't settle for poor quality copies.

Cutting thick glass is continuously gaining importance. However, it may cause problems depending on the glass quality and the expectations on the finished piece. The solution: Innovative Bohle products for thick glass processing. For cutting and opening cuts, for straight or shaped cuts - here you find everything you need.

High quality - made in Germany.

Avoid time-consuming drilling and sawing when doing cut-outs. Bohle developed cut-out kits especially for this purpose which allow you to achieve amazing results.

High quality - made in Germany.

Cutting circles and ovals can be a demanding task especially when cutting thick glass.
In addition to traditional circle cutters for "normal" glass thicknesses, Bohle offers a wide range of products for many different applications.

High quality - made in Germany.

Bohle straight edges and L-Squares are indispensable in any glazier shop. The premium Straight Edges and Squares are Made in Germany and available in different material thicknesses (1/6", 3/16" and 3/8" - 4, 5 and 10 mm) as well as with or without integrated suction cups. For the fixation of straight edges without suction cups, we recommend the straight edge holder Art. No. BO 670.0. All straight edges with integrated suction cups are suitable for use with the SILBERSCHNITT cutting skid Art. No. BO 2720.0.

High quality - Made in Germany.

For quick and easy repetative cutting of staight lines or strips. We have a range of products for small and large strip sizes.

High quality - made in Germany.